Screw Pump VACUU·PURE® 10C  VACUUBRAND
Screw Pump VACUU·PURE® 10C
VACUUBRAND


Screw pump for aggressive gases and vapors.

The dry screw pump VACUU·PURE® 10C reliably delivers the benefits of oil-free vacuum technology in the pressure range of 10-3 mbar.

VACUU·PURE 10C is ideally suited for clean processes and the production of pure products. The screw pump is especially designed for processes in the vacuum range down to 10-3 mbar, however unlike other fine vacuum technologies it can be used across the entire pressure range from atmospheric pressure to its ultimate vacuum. At the same time, aggressive gases and vapors can be pumped without any worries because of the high chemical resistance. The use of a cold trap is no longer necessary in the majority of applications.

VACUU·PURE easily handles high vapor loads through its extraordinary condensate compatibility. Thanks to this capability, a gas ballast is unnecessary, avoiding associated disadvantages like the reduction in pumping speed and an increase in noise levels. The integrated regeneration mode enables rapid drying of the pump at the end of the process. This allows sample throughput to be increased significantly as compared to other pump technologies.

The vacuum pump combines 3 important benefits for the user:

100 % oil-free
Clean processes, pure products.

Dry screw pump technology as a solution for the use in laboratory scale. The special design with 2 cantilevered spindles and a magnetic gear allows fully oil-free operation. The spindles run contact-free and are thus free of abrasion. This enables clean processes and pure products and protects the laboratory and environment. Save both time and operating costs, since there is no need to dispose of waste oil or to interrupt your work for oil changes.

Chemically resistant
Developed for aggressive media.

The wetted materials in the vacuum pump are all made of chemically resistant polymers. A thick-walled PEEK encapsulation protects the spindles and stator inside the pumping chamber, providing high chemical resistance.

The chemically resistant wetted materials make VACUU·PURE 10C well-suited for work with aggressive gases and vapors. Cold traps are not typically needed to protect the pump, as it is often the case with other technologies. The screw pump has an exceptionally high vapor and condensate compatibility. Thanks to the integrated regeneration mode, it dries out quickly after pumping heavy vapor loads and is ready for the next process.

No wear parts
Safe processes without interruption.

A major benefit of VACUU·PURE is that it does not have any wear parts. The spindles rotate contact-free. Components are manufactured with the highest precision, down to the smallest detail.

The special design enables you to run your process without interruption. VACUU?PURE has no scheduled maintenance for replacement of wear parts. This saves time, reduces operating costs, and enables trouble-free operation.

Items supplied:
Pump completely mounted, ready for use, connection with small flange KF DN 25 (2 x centering and clamping rings included), with manual. To establish a hose nozzle connection, suitable KF flanges with hose nozzle are available for order.
Gewicht:21.50 kg
Noise level:55.00 [dBA]
Max. air flow
[m3/h]
Ultimate pressure (abs.)
[µbar]
Length
[mm]
Breite
mm
Höhe
mm
Order No.PU Manuf. Prod. No. 
9.005 x 10-3507.00269.00413.0052048651-20751000 
Accessories:
Vacuum gauge VACUU·VIEW extended
Accessories for screw pumps VACUU·PURE 10 / 10C