The compact refrigerated and heating circulators are renowned for its high energy efficiency, a working temperature powerful infinitely range from - 20 resp. - 30 to + 100 °C and a variable pressure and suction pump. The on-demand and speed-controlled compressor reduces noise and operating costs.
The high-quality Isolation of the 4 l bath allows fast heating and reduces heat input when cooling. Using the external temperature control circuit is possible for up to 2.5 l thermofluid without a refill.
The integrated hopper and drain valve ensure a safe and clean handling of the thermofluid. The easy-to-open front flap allows an easy cleaning of the cooling unitás air filter.There is a drain valve on the front side of the bath. A hose can be connected to empty the bath, so the user does not get in direct contact with the thermofluid.
- Speed-controlled refrigeration system with 400 W cooling capacity.
- Speed-controlled pump make of PEEK: (0.5 bar; 22 l / min).
- 1500 W heating capacity (1200 W @115V).
- Digital level indicator.
- Safety classification III (FL) acc. to DIN 12876.
- Adjustable temperature safety circuit.
- RS 232 and USB interfaces.
Additionally with HRC 2 control:The HRC 2 control in combination with an external temperature sensor is perfectly suitable to precisely temper external closed or open applications.
With the Wireless Controller (Wico) the HRC 2 control can be operated safely and conveniently everywhere. Processes can be automated and simplified through 10 freely programmable temperature ramps with each 10 steps.
- Operating mode D (confirmation mode).
- Signal if set point is reached.
- Timer / counter.
- Outgassing function for labreactors.
- Adjustable temperature safety circuit.
- Connection socket for external PT 100 temperature sensor (accessory: PT100.30; Lemo connector).
- Connection of magnetic valves possible (Mulit IO).
- Alarm contact (Multi IO).
- Connector for standby contact input (Multi IO).