The BERNER pandemic protection kit has been designed for workers who need to work in infectious zones for a limited time period. It meets the recommendations of the German Robert-Koch-Institute (RKI) for infectious protection sets type 1. In this case the kit is equipped with security boots. Acc. to the recommendations of the RKI for this type of protection kits, only a slight decontamination is possible due to the absent gas filter protection.
The kit contains:- 1 Dupont Tyvek® 800J impermeable protective overall of the highest category III, type 3, additionally tested as protective clothing against infective agents acc. to EN 14126 (type 3-B).
- 1 pair of safety boots type S5 with puncture-resistant sole (EN ISO 20345) and incorporated steel cap.
- 1 particle-filtering Uvex FFP3 respiratory mask acc. to EN 149, retention capacity of at least 99 %.
- 1 gas-tight safety goggles 3M.
- 1 pair BERNER nitrile chemical safety gloves Manu N.
- 1 pair BERNER latex chemical safety gloves Manu L made of extra thick material.
- 1 roll water proof duct tape to seal transitions.
- 1 waste bag.
- 1 cable tie.
- 1 picture guide leaflet on how to put on the PPE in German and English.
- Comprehensive PPE documentation.