Hazardous Material Working Places with Fresh Air Curtain  asecos®
Hazardous Material Working Places with Fresh Air Curtain  asecos®
Hazardous Material Working Places with Fresh Air Curtain  asecos®
Hazardous Material Working Places with Fresh Air Curtain  asecos®
Hazardous Material Working Places with Fresh Air Curtain  asecos®
Hazardous Material Working Places with Fresh Air Curtain
asecos®


Safe chemical handling.
  • Specified working place limit values are maintained.
  • Max. user safety.
  • Made of chemically resistant, anodised aluminium profiles.
  • Integrated, working place lighting mounted to avoid glare.
  • Monitoring electronics as standard.
  • Highly effective pollutant capture through special, internally mounted fresh air curtain equipment.
  • Chemically resistant exhaust air ducts - connecting pieces (DN 160) on the ceiling region for connecting to the customer's exhaust air plant.

For models GAP.125.xx:
  • All the electronic equipment can be started up and switched off by switches.

Standard equipment:
  • Inlet and outlet air monitoring (visual and audible alarm).
  • Interior lighting.
  • Transparent side walls.
  • Rear wall easily dismantled for optimum cleaning.
  • Melamine resin coated rear wall.
  • St. steel working surface.
  • Medium duct with 2 sockets (models with width of 1800 mm upwards with 4 sockets)

Extraction air inlet NW: 160 mm.
Working place type:hazardous material work place
TypeMax. air flow
[m3/h]
Outer width
[mm]
Outer depth
[mm]
Outer height
[mm]
DescriptionOrder No.PU Manuf. Prod. No. 
GAP.095.090.060370.00900.00600.001100.0052 Pa pressure loss, 1 air vent (Ø 160 mm)60088901-32786
GAP.095.120.060510.001200.00600.001100.0099 Pa pressure loss, 1 air vent (Ø 160 mm)54427981-32788
GAP.095.180.060*790.001800.00600.001100.0061 Pa pressure loss, 2 air vents (Ø 160 mm)54427991-32792
GAP.125.090500.00900.00750.001400.0096 Pa pressure loss, 1 air vent (Ø 160 mm)54428001-32797 
GAP.125.120690.001200.00750.001400.00185 Pa pressure loss, 1 air vent (Ø 160 mm)54428011-32801 
GAP.125.180*1080.001800.00750.001400.00114 Pa pressure loss, 2 air vents (Ø 160 mm)54428021-32807
Supplied without underbench cabinets, support frame and facing panel.
Additional media on request.
* Extraction air inlet NW: 2 x 160 mm.
Accessories:
Configurations for hazardous material working places with fresh air curtain
Accessories for hazardous material working places with fresh air curtain
Commissioning of safety workbenches
Validation tests of laboratory devices