Ultrasonic Homogeniser SONOPULS HD 4050  Bandelin
Ultrasonic Homogeniser SONOPULS HD 4050
Bandelin


  • Display: graphic / alphanumeric liquid, crystal display of amplitude, pulsation mode, time, energy, optionally temperature.
  • Menu guided: setting of all values through 'push and turn'.
  • 9 user programmes, with software WINPULS®: 99.
  • Remote control with PC: RS232 (infrared).
  • Error diagnosis, automatic storage of the last adjusted values, operating test.
  • Remote control: foot switch.
  • Sequencing.

AMPLICHRON®-system:
Guarantees a constant amplitude independently from changing conditions within the sample. It ensures reproducible results for process validation. Settings within a range of 10 to 100 %. Verification of actual value at the display. Permanent control of ultrasound irradiation as well as indication of wear of the probe.

Pulsation:
Limits increase of temperature when processing sensitive samples. The adjustable pulsation allows cooling during rest intervals.
  • ON cycles 0.2 to 600 s.
  • OFF cycles 0.3 to 600 s.

Fail-safe during continuous operation and idling:
RFI-proofed and CE-marked, also as medical device compliant to the directive for in-vitro diagnostics 98/79/EG.
  • For volumes from 0.5 to 100 ml.
  • Time modes: 9 h: 59 min: 59 s, continuous or timed.
  • Safety shut down: 9 h: 59 min: 59 s.
  • Ready-to-operate basic equipment for volumes from 0.5 to 20 ml consisting of generator GM 4100, ultrasonic converter UW 50 and titanium probe TS 102 Ø 2 mm.
Technical Data:
Ultrasonic generator:

GM 4200
Dimensions:150 x 220 x 335 mm
Mains supply:230 V~, 50 / 60 Hz, optionally / 115 V~, 50 / 60 Hz
ConverterUW 50
Dimensions:Ø 45 x 175 mm
Ultrasonic nominal power:50 W
Min. Arbeitsvol.
[ml]
Max. Arbeitsvol.
[ml]
Ultrasonic nominal output
[W]
TypeOrder No.PU Manuf. Prod. No. 
0.50100.0050SONOPULS HD 405054423341-4050 
Further available probes 2 / 3 / 4.5 and 6 mm upon request.
Accessories:
Stand with lab clamps HG 20 / HG 40