Combisart® Filter Manifold Systems, Stainless Steel

St. steel manifold 1.4301 (acc. to B.S.304S31|AISI 304), accommodates any type of vacuum funnel. St. steel three-way valves (taps) allow the vacuum for each filter holder to be individually controlled and each holder to be sterilely vented. The low height of the manifold ports is particularly advantageous for working on a clean bench. In each set st. steel funnels with lids are preassembled.
  • Sterile venting of each membrane after filtration.
  • Sterilisation acc. to ISO 8199.
  • Special polished st. steel surfaces allow easy cleaning and rinsing.
  • Easy pouring out of non-filterable samples.
  • Equally easy for right- and left-handed users.
  • Max. flexibility due to different set-ups.
Technical Data:
Max. operating pressure:vacuum or max. 2 bar (29 psi) pressure
Inlets:TR 20 + 2 female threads
Outlet:hose nipple, DN 10
Sterilisation:autoclaving (max. 134 °C), dry heat (max. 180 °C)
Membrane:no indication
DescriptionOrder No.PU manuf. prod. no. 
1-branch stainless steel manifold100.001 x 100 ml54330391-16844-CS 
1-branch stainless steel manifold500.001 x 500 ml54330401-16845-CS 
3-branch stainless steel manifold100.003 x 100 ml54330411-16824-CS 
3-branch stainless steel manifold500.003 x 500 ml54330421-16828-CS 
6-branch stainless steel manifold100.006 x 100 ml54330441-16832-CS 
6-branch stainless steel manifold500.006 x 500 ml54330431-16831-CS 
Flat gasket, PTFE