Horizontal pass-through autoclaves H series 2D

Catalogue

Autoclaves & Sterilisers

Systec
Horizontal Pass-Through Autoclaves H Series 2D

Standard features:

Integrated, separate steam generator.
Housing, support frame and pressure vessel made of corrosion-resistant st. steel.
Temperature and pressure range 140 °C, 4 bar.
Touch-screen control.
Number of sterilisation programmes: up to 100.
Code-secured access rights for changing parameters and further safety-relevant intervention.
Internal memory for storing up to 500 sterilisation cycles.
Timer for starting programmes.
Flexible PT-100 temperature sensor.
Additional temperature sensor in condense exhaust.
Temperature holding function for liquids after programme finish.
Special programme for Durham tubes.
Calculation of F0 value.
Special programme for waste sterilisation with pulsed heat-up for more efficient air exhaust.
Water-cooled steam exhaust, thermostatically controlled.
Programmable automatic door-opening on completion of programme.
RS-232 and RS-485 interfaces for external data transmission (network-compatible).

Triple safety aspects:

Only one door can be opened at a time. If one door is open, the other is automatically locked.
If the autoclave is switched off or if no current is available (e. g. power failure), both doors remain locked.
If the door at the non-sterile side is opened, a sterilisation programme has to be performed before the door at the sterile side can be opened.

The locking system can be adapted to customers' wishes. Doors and control panel are made of heat-insulating plastic, the housing completely of st. steel and the st. steel edges specially processed for smooth junctions with walls. Operation, however, can be carried out from both sides, the position (open or closed) of the opposite door being indicated on the display.

For use under the most stringent clean room and safety conditions:

For biological safety laboratories: fitting as a sterilisation and pass-through lock for protecting the external environment.
For clean rooms in laboratories and production facilities: as a sterilisation and pass-through lock separating sterile and non-sterile areas.

Netzanschluss:

[_11/11_]

Type	klappbar	Kammervol., nominal l	Kammerinnendurchmesser [mm]	Kammertiefe mm	Breite mm	Tiefe mm	Höhe mm	Stromstärke A	Order No.	PU		Manuf. Prod. No.
Systec HX-90 2D	98.00	90.00	400.00	750.00	690.00	1160.00	1430.00	16.00	5439855	1	-	2096
Systec HX-150 2D	155.00	150.00	500.00	750.00	790.00	1200.00	1530.00	16.00	5439856	1	-	2156
Systec HX-200 2D	205.00	200.00	500.00	1000.00	790.00	1450.00	1530.00	16.00	5439857	1	-	2207
Systec HX-320 2D	370.00	320.00	740.00	750.00	930.00	1210.00	1683.00	32.00	5437367	1	-	2235
Systec HX-430 2D	480.00	430.00	740.00	1000.00	930.00	1460.00	1683.00	32.00	5437368	1	-	2245
Systec HX-540 2D	590.00	540.00	740.00	1250.00	930.00	1710.00	1683.00	32.00	5437369	1	-	2255
Systec HX-650 2D	700.00	650.00	740.00	1500.00	930.00	1960.00	1683.00	32.00	5437370	1	-	2265
Systec HX-780 2D	870.00	780.00	1000.00	1000.00	1255.00	1750.00	1850.00	32.00	5437371	1	-	2275
Systec HX-980 2D	1070.00	980.00	1000.00	1250.00	1255.00	2000.00	1850.00	32.00	5437372	1	-	2285
Systec HX-1180 2D	1270.00	1180.00	1000.00	1500.00	1255.00	2250.00	1850.00	32.00	5437373	1	-	2295
Systec HX-1380 2D	1470.00	1380.00	1000.00	1750.00	1255.00	2500.00	1850.00	32.00	5437374	1	-	2305
Systec HX-1580 2D	1670.00	1580.00	1000.00	2000.00	1255.00	2750.00	1850.00	32.00	5437375	1	-	2315

Systec autoclaves are delivered ready for subsequent installation of all options.

Further options and special programmes as well as baskets and inserts, transport and loading systems on request.

Accessories:

Validation tests of laboratory devices

Horizontal pass-through autoclaves H series 2DManufacturers:SystecProduct groups:Sterilising / AutoclavingAlternate products: