Heating and cooling seamlessly with one system thanks to Peltier technology. In this respect, cooled incubators IPPeco not only contribute to climate protection, but also achieve an additional decrease in operating costs of up 90 % compared to compressor technology. Outstanding control precision and extremely small fluctuations.
Extremely quiet, space-saving and vibration-free due to the fact that no compressor is required. Peltier cooled incubators IPPeco / IPPecoplus can also be applied in entomology.
No condensation in the interior chamber: due to the closed Peltier cooling system, no outside air is exchanged. Formation of condensation during the cooling process takes place on the outside heat sink. In addition, the fans integrated in the Peltier elements ensure a rapid transport of energy as well as an optimal temperature distribution.
- LED light module for model sizes 110 to 750 (optional): dimmable LED light in 3 alternative colour temperatures (coldwhite or warmwhite light or cold-white plus warm-white light, dimmable in 10 % steps).
- Acc. to DIN 12880:2007-05, EN 61010-1 (IEC 61010-1), 61010-2-010.
AtmoCONTROL - control and logging softwareFor direct setting parameters as well as process time. Fast and easy programming of complex processes via AtmoCONTROL by means of the mouse or touchpad on the notebook.
- Reading out, managing and organising the data logger.
- Saving the log memory in various formats.
- Online monitoring of up to 32 connected appliances.
- Optical alarms when the alarm limits individually set at the ControlCOCKPIT are exceeded.
- Automatic alarm to one or several e-mail addresses.
| Technical Data: | |
| Working temperature range without light: | 0 (at least 20 °C below ambient temperature) to + 70 °C |
| Working temperature range with light: | 10 to 40 °C |
| Setting temperature range: | 0 to 70 °C |
| Setting accuracy: | 0.1 °C |
- TwinDISPLAY: ControlCOCKPIT with 2 TFT colour graphical displays.
- 2 Pt100 sensors DIN class A in a 4-wire circuit for mutual monitoring, taking over functions in case of an error.
- HeatBALANCE function for application specific adjustment of heat output distribution (balance) between the upper and lower heating groups in an adjustment range between - 50 and + 50 % (not valid for IPP110plus).
- AtmoCONTROL software on an USB stick for programming, managing and transferring programmes via ethernet interface or USB port.
- Intuitive programming and archiving of ramps and programme sequences.
- ControlCOCKPIT with USB port for uploading programmes, reading out protocol logs, activating the User-ID function.
- Displaying of already logged protocol data on the ControlCOCKPIT (max. 10000 values correspond to approx. 1 week).
- Ethernet interface on the rear of the appliance for reading out the protocol log and for uploading and implementing programmes and for online logging.
- Multiple overtemperature protection: electronic temperature monitoring TWW (protection class 3.3) and mechanical temperature limiter TB (protection class 1) acc. to. DIN 12880, AutoSAFETY automatically adjusts to the set value within a freely adjustable tolerance range. Setting individual MIN / MAX values for over / undertemperature alarm.
