Dispersing elements for T 10 basic / standard ULTRA-TURRAX®

Dispersing Elements for T 10 basic / standard ULTRA-TURRAX^®
IKA

Plastic dispersing elements S 10 D:	shaft length: 65 mm (S 10 D - 7G - KS - 65), 110 mm (S 10 D - 7G - KS - 110) materials incontact with medium: polycarbonate (PC), polysulfon (PSU), plastic materials used approved by FDA max. temperature: 100 °C sterilisation: yes, autoclavable
Dispersing elements S 10 N:	shaft length: 92 mm (S 10 N - 5 G), 115 mm (S 10 N - 18 G, S 10 N - 10G) materials in contact with medium: PTFE, AISI 316L pH range: 2 to 13 suitable for solvents, abrasive substances max. temperature: 180 °C sterilisation: all methods

For	Rotor-Ø [mm]	Min. working range [ml]	Max. working range [ml]	Type	Ø Stator [mm]	Circumferential speed [m/s]	Min. immersion depth [mm]	Einstechtiefe mm	Min. ultimate fineness suspensions [µm]	Max. ultimate fineness suspensions [µm]	Min. ultimate fineness emulsions [µm]	Max. ultimate fineness emulsions [µm]	Description	Order No.	PU		Manuf. Prod. No.
ULTRA-TURRAX T 10	4.80	1.00	20.00	1 to 20	7.00	7.50	20.00	50.00					S 10 D - 7G - KS - 65	5571224	24	-	0020002076
ULTRA-TURRAX T 10	4.80	1.00	40.00	1 to 40	7.00	7.50	20.00	90.00					S 10 D - 7G - KS - 110	5571226	24	-	0020002075
ULTRA-TURRAX T 10	3.80	0.50	10.00	0.5 to 10	5.00	6.00	20.00	75.00	5.00	25.00	1.00	10.00	S 10 N - 5 G	5571227	1	-	0003304000
ULTRA-TURRAX T 10	6.10	1.00	50.00	1 to 50	8.00	9.60	20.00	95.00	5.00	25.00	1.00	10.00	S 10 N - 8 G	5571228	1	-	0003305500
ULTRA-TURRAX T 10	7.60	1.00	100.00	1 to 100	10.00	11.90	20.00	100.00	5.00	25.00	1.00	10.00	S 10 N - 10 G	5571229	1	-	0003370100
ULTRA-TURRAX T 10	6.10	1.00	50.00	1 to 50	8.00	9.60	22.00	95.00	5.00	25.00	1.00	10.00	S 10 N - 8 G - ST	5432919	1	-	0004446500
ULTRA-TURRAX T 10	7.50	1.00	100.00	1 to 100	10.00	11.80	23.00	100.00	5.00	25.00	1.00	10.00	S 10 N - 10 G - ST	5432920	1	-	0004446700

Dispersing elements for T 10 basic / standard ULTRA-TURRAX®Manufacturers:IKA-WerkeProduct groups:DispersersUN/SPSC:Alternate products: