Explosion-proof exterior and interior acc. to ATEX regulations without extra charge.
Refrigerators / freezers for laboratory- and medical requirements with circulating air and automatic drip water evaporation, bottom machine, plug-in ready.
- Exterior / interior: coated white / ABS plastic.
- Door hinged on right, switchable, with framing, exchangeable magnetical seal and lock.
- Height adjustable feet in the front, castors in the back (medilab CR410 / CF410: alternatively also only with high feet or only high castors with locking device).
- Clear control panel with digital temperature display.
- Interior: seamless, vacuum-formed ABS plastic, one floor grid, coated white.
- Isolation: environmentally friendly 50 mm HFC-free cyclopentane foam, injected directly to maintain a stable sandwich construction.
- medilab CR210 / CF210 also for underbench use.
Control:Electronic LED control with integrated min. / max. temperature memory, potential-free contact for control unit, time-controllable defrosting cycles, individually adjustable door- and temperature alarm, optical and acoustic alarm when temperature is over or below the set limit, adjustable hysteresis from 0 / - 1 K to + 3 / - 3 K, key lock to prevent unauthorised temperature re-adjustment, protection against overheating of the compressor, fail-safe program for protection of products, serial door lock.
medilab CR610 / CF610:- Control unit, extra sensor, alarm recording, high / low temperature and calibration function.
- Varnished steel sheet or st. steel.
- Additional sensor.
- Massive door.
- Cooling unit at the top.
- Wheels, legs or plinth-mounting.*