Bottle Top Burettes VITLAB® continuous  VITLAB®
Bottle Top Burettes VITLAB® continuous
VITLAB®


The VITLAB® continuous bottle-top burette enables continuous titration, which leads to rapid, convenient, and accurate results. The angled display shows 4-position titration volume in large, easily read numbers, which simplifies operation. Turning the 2 hand wheels supplies the titration medium in a continuous and pulse-free manner via the patented double-piston pump. Filling procedures are not necessary. This innovative technology increases safety; its compact design and low centre of gravity reduce risk of overturning, especially with smaller bottles. The height and length of the discharge tube can be adjusted, making it possible to work safely with both short and tall bottles. The patented recirculation system prevents the loss of valuable reagent and reduces the risk of splashes. With its simple-to-use calibration function, VITLAB® continuous fulfils the corresponding requirements for test equipment monitoring without instrument downtime. Margins of error are under those specified in the DIN EN ISO 8655-3 standard, even for partial volumes. Also available with DAkkS calibration certificate or individual quality certificate.

Items supplied:
VITLAB® continuous E / RS, with GL 45 connecting threads and GL 32, GL 38 and S 40 (buttress thread) size PP thread adapters, telescopic filling tube (200 to 350 mm), telescopic discharge tube (140 to 220 mm), 2 1.5 V microbatteries (LR 03 / AAA), instruction manual and quality certificate.
Technical Data:
Margins of error in accordance with DIN EN ISO 8655-3
VITLAB® continuous E:
VITLAB® continuous RS:


at 25 ml
at 50 ml
Accuracy:≤ ± 0.2 %
Coefficient of variation:≤ 0.1 %
Thread:GL 45
Volumen
[ml]
TypeDescriptionOrder No.PU Manuf. Prod. No. 
25.00VITLAB® continuous E2554222331-1620506 
50.00VITLAB® continuous RS5054222341-1620507 
* Error tolerance conforming to DIN EN ISO 8655-3, related to the nominal (max.) volume marked on the device where the device, environment and distilled H2O are at the same temperature (20 °C).
Checks are done in accordance with DIN EN ISO 8655-6 with the device filled to capacity and with uniform and jolt-free dosing.