Hazardous Material Working Places Ex Line  asecos®
Hazardous Material Working Places Ex Line  asecos®
Hazardous Material Working Places Ex Line  asecos®
Hazardous Material Working Places Ex Line
asecos®


Safe chemical handling at potentially explosive areas of Zone 1.
  • Required occupational exposure limits are maintained.
  • Max. user safety.
  • Made of well resistant, anodised aluminium profiles.
  • Highly effective capturing of hazardous materials inside the workplace through special fresh air curtain technology.
  • Prepared for connection to the on-site exhaust air system and for electrical supply (230 V / 50 Hz).
  • Electronic eqiupment acc. to directive 94/9/EG.

Standard equipment:
  • Switch box incl. complete montoring electronic (must be instralled outside of the explosive area).
  • Transparent side walls made from 5 mm toughened safety glass.
  • Opaque, fold-away deflector.
  • Melamine resin coated rear wall.
  • St. steel working surface (V2A / 1.430) as seal-welded sump.
  • Support frame for standing work.
  • Extraction air inlet NW: 160 mm (width 1800 mm with 2 inets).
Working place type:hazardous material work place
Outer depth:750.00 [mm]
Outer height:1400.00 [mm]
TypeMax. air flow
[m3/h]
Outer width
[mm]
DescriptionOrder No.PU Manuf. Prod. No. 
Ex Line GAP.125.9.7-Ex430.00900.00150 Pa pressure loss54211521-14164 
Ex Line GAP.125.12.7-Ex595.001200.00285 Pa pressure loss54211531-14207 
Ex Line GAP.125.18.7-Ex**920.001800.002 x 171 Pa pressure loss54211541-14208 
GAP.125.090.EX500.00900.0096 Pa pressure loss54428311-32799-901 
GAP.125.120.EX690.001200.00185 Pa pressure loss54428321-32803-901 
GAP.125.180.EX**1080.001800.00114 Pa pressure loss54428331-32809-901
* Must be mounted outside the potentially explosive area.
** Extraction air inlet NW: 2 x 160 mm.
Accessories:
Accessories for Hazardous Material Working places
Commissioning of safety workbenches
Validation tests of laboratory devices