Hazardous Material Working Places High Line  asecos®
Hazardous Material Working Places High Line  asecos®
Hazardous Material Working Places High Line  asecos®
Hazardous Material Working Places High Line  asecos®
Hazardous Material Working Places High Line  asecos®
Hazardous Material Working Places High Line  asecos®
Hazardous Material Working Places High Line
asecos®


Safe chemical handling.
  • Specified working place limit values are maintained.
  • Max. user safety.
  • Made of chemically resistant, anodised aluminium profiles.
  • Glazed at the side with ESG.
  • Integrated, working place lighting mounted to avoid glare.
  • Monitoring electronics as standard.
  • Highly effective pollutant capture through special, internally mounted fresh air curtain equipment.
  • Chemically resistant exhaust air ducts - connecting pieces (DN 160) on the ceiling region for connecting to the customer's exhaust air plant.

For models GAP.125.xx:
  • All the electronic equipment can be started up and switched off by switches.

Standard equipment:
  • Inlet and outlet air monitoring (visual and audible alarm).
  • Interior lighting.
  • Transparent side walls.
  • Rear wall easily dismantled for optimum cleaning.
  • Melamine resin coated rear wall.
  • Stainless steel working surface.
  • Medium duct with 2 sockets (models with width of 1800 mm upwards with 4 sockets)

Extraction air inlet NW: 160 mm.
TypeOutside dimensions
(W x D x H)
mm
Total volume
[m³/h]
Pressure loss
Pa
Order No.PU Manuf. Prod. No. 
High Line GAP.95.9.6900 x 600 x 11003108154211461-21466 
High Line GAP.95.12.61200 x 600 x 110044015554211471-21467 
High Line GAP.95.18.6*1800 x 600 x 11006802 x 9354211481-21468 
High Line GAP.125.9.7900 x 750 x 140043115054211491-21469 
High Line GAP.125.12.71200 x 750 x 140059528554211501-21470 
High Line GAP.125.18.7*1800 x 750 x 14009202 x 17054211511-21471 
Supplied without underbench cabinets, support frame and facing panel.
Additional media on request.
* Extraction air inlet NW: 2 x 160 mm.
Accessories:
Accessories for Hazardous Material Working places
Commissioning of safety workbenches
Validation tests of laboratory devices