Hand-Held Eye Showers  B-SAFETY
Hand-Held Eye Showers
B-SAFETY


Hand-held eye shower with one or two high-performance spray heads. Numerous mounting- and hose variations are possible. Water-bearing parts made of brass and plastics in accordance with the requirements of the drinking water ordiances. DIN-DVGW tested and approved.
  • Handhold with integrated, locking grip made of plastics, valve not self-locking.
  • St. steel covered hose for potable water, 1.5 m.
  • B-SAFETY-high-performance spray head: chemically resistant powder-coated, with plastic spray plate, calcination-poor, with rubber cover and tightly closing screw cap with hinge mechanism.
  • Integrated backflow preventer.
  • Spray head with integrated flow regulation.
  • Acc. to DIN EN 15154-2:2006.
  • Label for eye shower acc. to DIN 4844-2-D and BGV A8, self-adhesive 100 x 100 mm.
  • Incl. mounting kit with screw nut M28 x 1.5 mm with 2 screws M5 for difficult to access installations, sealing for wall and table surface via o-ring.
Technical Data:
Hose length:1500 mm
Water inlet:1/2" female
Ausführung:[_0/0_]
TypeHöhe
mm
Durchfluss
l / min
MontageOrder No.PU Manuf. Prod. No. 
1 spray head250.007.00wall / table54205821-BR 712 025
1 spray head250.007.00wall54205831-BR 712 035
1 spray head, 45° angle250.007.00wall / table54205841-BR 713 025
2 spray heads, 45° angle300.0014.00wall / table54205851-BR 714 025
2 spray heads300.0014.00[_62/0_]67021251-BR 715 025