BOLA sleeves / standard joint sleeves

BOLA Sleeves / Standard Joint Sleeves
Bohlender

PTFE. For pushing over NS cones. Reusable. Sealing ribs on the outside of the sleeve seal without grease.

Sleeves: suitable for vacuum down to 0.1 mbar, with ribs.
Standard joint sleeves: with round grip, for high-vacuum sealing (leakage rate: < 1 x 10^-4 x l x s^-1).

Type	Core [NS]	Thickness [mm]	Order No.	PU		Manuf. Prod. No.
Standard joint sleeves	14 / 23	0.25	5011642	1	+	H 933-03
Standard joint sleeves	19 / 26	0.25	5011643	1	+	H 933-04
Standard joint sleeves	24 / 29	0.25	5011644	1	-	H 933-05
Standard joint sleeves	29 / 32	0.25	5011645	1	+	H 933-06
Standard joint sleeves	45 / 40	0.25	5011647	1	-	H 933-09
Standard joint sleeves	60 / 46	0.25	5011649	1	-	H 933-12
Sleeves	7 / 16	0.15	5011651	10	-	H 930-01
Sleeves	10 / 19	0.15	5011652	10	-	H 930-02
Sleeves	12 / 21	0.15	5011653	10	-	H 930-03
Sleeves	14 / 23	0.15	5011655	10	+	H 930-04
Sleeves	19 / 26	0.15	5011656	10	-	H 930-05
Sleeves	24 / 29	0.15	5011657	10	-	H 930-06
Sleeves	29 / 32	0.15	5011658	10	+	H 930-07
Sleeves	45 / 40	0.15	5011660	5	-	H 930-10
Sleeves	60 / 46	0.15	5011661	1	-	H 930-13
Sleeves	71 / 51	0.15	5011662	1	-	H 930-14

Accessories:

High-vacuum silicone greases KORASILON

BOLA sleeves / standard joint sleevesManufacturers:BohlenderProduct groups:Ground Glass JointsUN/SPSC:Materials:PTFEAlternate products: