Pump-Heads for Gear Pumps REGLO-Z, REGLO-ZS, BVP-Z, MCP-Z, MCP-Z Process
ISMATEC


To operate a magnetically coupled gear pump application specific pump-heads are required, a magnet and 2 tube connectors. There are many different pump-head models available. Permissible temperature - 45 to + 177 ºC. For pumps with Teflon® gears: Please state an operating temperature above 54 °C when placing the order.
Please note: The flow rate depends on the model.
  • Max. system pressure: 21 bar.
  • SERVICE-KITS are also available.
Gear material:
PPS:polyphenylene sulphide
G:graphite (carbon)
PTFE:polytetrafluoroethylene
Housing material:stainless steel SS 316
Material:no indication
Piston material:no indication
Cylinder material:no indication
Schutzklasse:[_18/0_]
TypeMin. pump capacity
[ml/min]
Max. pump capacity
[ml/min]
Max. differential pressure
[bar]
Gear materialDescriptionOrder No.PU Manuf. Prod. No. 
Z-12032.000003950.003.50PTFEmax. differential pressure REGLO 2 bar, BVP / MCP 3.5 bar58283201-MI0013 
Z-13032.000003950.005.20[_2/2_]max. differential pressure REGLO 2 bar, BVP / MCP 5.2 bar58283301-MI0019 
Z-14032.000003950.003.50PTFEmax. differential pressure REGLO 2 bar, BVP / MCP 3.5 bar58283401-MI0016 
Z-14255.000005480.003.50PTFE 58283421-MI0018 
Z-15032.000003950.005.20[_2/2_]max. differential pressure REGLO 2 bar, BVP / MCP 5.2 bar58284121-MI0020 
Z-1812.10000252.002.80graphite 58284131-ISM896B 
Z-1834.20000504.002.80graphite 58284141-MI0008 
Z-1860.8500099.001.40graphite 58284151-MI0006 
Z-18304.60000560.005.20[_2/2_] 58284181-MI0131 
Z-20035.000003509.005.20[_2/2_] 58284161-MI0022 
Z-20173.000007241.003.50[_2/2_] 58284171-MI0023 
Flow rate depends on gear pump drive.