Flow rate range from 0.001 to 3700 ml / min (depending on the mounted pump-head).
Pumping and filling in one pump, microprocessor controlled, with ultra-precise speed control and dispensing function. For 1 to 24 pump channels. Speed (2 to 240 min^-1) is precisely controlled to 0.1 % and can be programmed using the membrane key-pad and LCD display. A wide variety of dispensing modes delivers highly accurate and reproducible results. With interfaces (RS232) for PC control and foot switch. Can be used for sterile dispensing (up to 135 °C) with suitable tubing material.

Programmable functions:

• ml / min.
• Drive speed.
• Dripfree due to roller backsteps.
• Calibration of ml / min (flow rate) and ml (volumes).
• Drive start / stop.

Dispensing by:

• Volumes ml.
• Volumes / time unit.
• Dispensing time (0.1 to 999 h).
• Interval dispensing by time / volumes with a pause.
• Supplied without pump-head.