Z.š. | Opis | |
---|
1 | 0100-2703: Gas connector, dilution gas line connection to dilution port, for Ag… | |
2 | 5042-0922: Inner sleeve, carrier/aux/blend gas, for gas line connection to conn… | |
3 | 5042-0923: Inner sleeve, plasma gas line, for gas line connection to connector … | |
4 | 5064-8016: Sample tubing, PTFE, 0.8 mm id, 1.6 mm od, 5 m, Agilent ICP-MS integ… | |
5 | 5064-8020: Sample tubing, PTFE, 2 mm id, 3 mm od, 5 m, Agilent ICP-MS integrate… | |
6 | 5064-8021: Nut, PTFE, for 3.0 mm od tubing, Agilent ICP-MS integrated sample in… | |
7 | 5064-8022: Ferrule, front and back, for 3.0 mm od tubing, Agilent ICP-MS integr… | |
8 | 5064-8023: Nut, PTFE, for 1.6 mm od tubing, Agilent ICP-MS integrated sample in… | |
9 | 5064-8024: Ferrule, front and back, for 1.6 mm od tubing, Agilent ICP-MS integr… | |
10 | 5064-8026: Tubing adapter, peristaltic pump, used to connect peristaltic pump t… | |
11 | 5064-8027: Tubing clamp, Agilent ICP-MS integrated sample introduction system w… | |
12 | 5064-8029: Tubing, spiral, 5 m, Agilent ICP-MS integrated sample introduction s… | |
13 | 5064-8032: Wrench, valve, for maintenance of Agilent ICP-MS integrated sample i… | |
14 | 5064-8033: Tag for tubing identification, Agilent ICP-MS integrated sample intr… | |
15 | 5064-8078: Carrier gas line connector, 4 mm diameter tube, for carrier gas line… | |
16 | 5182-2581: APG remote cable, Agilent ICP-MS integrated sample introduction syst… | |
17 | 7700 Hardware Maintenance Manual for Agilent 7700 Series ICP-MS | |
18 | 7900 Series ICP-MS Hardware Manual for Agilent 7900 Series ICP-MS | |
19 | 7900 Series ICP-MS Hardware Manual Japanese for Agilent 7900 Series ICP-MS | |
20 | 9499392M004: Oil mist filter kit for DS402 rotary vane pump. Includes oil mist … | |
21 | Air filter for G3292A chiller | |
22 | Alignment Boss GC-ICP-MS | |
23 | Alignment plate for RF work coil, Agilent 7500/7700 series ICP-MS | |
24 | Arsenic speciation analysis handbook, English, for ICP-MS | |
25 | Arsenic speciation analysis handbook, Japanese, for ICP-MS | |
26 | Ball Joint GC-ICP-MS | |
27 | Blank plug for dilution port, PTFE, for 8900 QQQ ICP-MS | |
28 | Connector for gas line at end cap Agilent ICP-MS | |
29 | Cross joint, Agilent ICP-MS integrated sample introduction system (ISIS) | |
30 | Dilution nozzle for ultra high matrix introduction, for Agilent 7900 ICP-MS | |
31 | Drain tube, Tygon, 3/32 x 5/32, 5 m | |
32 | Electrode kit for Penning gauge | |
33 | Electron multiplier for 8900 QQQ ICP-MS | |
34 | Electron multiplier for Agilent 7900 ICP-MS | |
35 | Electron multiplier for Agilent 8800 ICP-MS/MS | |
36 | End cap nut for ICO-MS nebulizer connection | |
37 | End cap retaining ring for spray chamber, for Agilent 7900 ICP-MS | |
38 | Extraction lens 1 for s-lens, Agilent 7700s and 8800 semi-conductor ICP-MS | |
39 | Extraction lens 1 for s-lens. Suits Agilent 8900 ICP-MS with s-lens | |
40 | Extraction lens 1 for x-lens, for Agilent 8900 Series ICP-MS | |
41 | Extraction lens 1, 7900 ICP-MS w/s-lens 1/pk. Suits Agilent 7900 Series ICP-MS. | |
42 | Extraction lens 1, 7900 ICP-MS w/x-lens 1/pk. Suits Agilent 7900 Series ICP-MS. | |
43 | Extraction lens 1, for m-lens, for Agilent 8900 Series ICP-MS | |
44 | Extraction lens 2 for s-lens, Agilent 7700s and 8800 semi-conductor ICP-MS | |
45 | Extraction lens 2 for s-lens. Suits Agilent 8900 ICP-MS with s-lens | |
46 | Extraction lens 2, 7900 ICP-MS w/s-lens 1/pk. Suits Agilent 7900 Series ICP-MS. | |
47 | Extraction lens 2, 7900 ICP-MS w/x-lens 1/pk. Suits Agilent 7900 Series ICP-MS. | |
48 | Extraction lens 2, for m-lens, for Agilent 8900 Series ICP-MS | |
49 | Extraction lens 2, for x-lens, for Agilent 8900 Series ICP-MS | |
50 | Extraction-Omega lens assembly for 8900 Series ICP-MS with m-lens | |
51 | Extraction-Omega lens assembly for 8900 Series ICP-MS with s-lens | |
52 | Extraction-Omega lens assembly, for Agilent 7900 ICP-MS with s-lens | |
53 | Extraction-Omega lens assembly, for Agilent 7900 ICP-MS with x-lens | |
54 | Extraction-Omega lens assy 7900 w/m-lens | |
55 | Ferrule For 0.25 Mm Id Pump Tubing | |
56 | Ferrule kit, GC/ICP-MS Interface | |
57 | Ferrule, graphite, GC/ICP-MS interface | |
58 | Filter, argon, for semi-conductor applications | |
59 | Fluid filter for G3292A chiller | |
60 | G1680-63720: USB 2.0 cable, 10 ft, for G7201A MassHunter software in Agilent 77… | |
61 | G1820-65027: Connector for plasma and auxiliary gas lines, for gas line connect… | |
62 | G1820-65052: Connector, polypropylene, for carrier gas line connection to conce… | |
63 | G1820-65478: Sample tubing, perfluoroalkoxy (PFA), 0.3 mm id, 1.6 mm id, 3 m, f… | |
64 | G1820-65526: Sample tubing, perfluoroalkoxy (PFA), PEEK guide, 0.15 mm id, 1.6 … | |
65 | G1820-65527: Sample tubing, perfluoroalkoxy (PFA), PEEK guide, 0.2 mm id, 1.6 m… | |
66 | G1820-65531: Sample tubing, perfluoroalkoxy (PFA), PEEK guide, 0.3 mm id, 1.6 m… | |
67 | G1820-65533: Ferrule and Viton O-ring Kit for Carrier Gas Line Connector for Ba… | |
68 | G1820-65541: LC connection kit, basic. Includes perfluoroalkoxy (PFA) sample tu… | |
69 | G1833-65133: Octopole assembly, Agilent 7500cs/ce/cx, without cell entrance/exi… | |
70 | G1833-65404: Polishing paper, 5 sheets each of waterproof polishing paper numbe… | |
71 | G1833-65583: Carrier gas line union connector for carrier gas line on MicroFlow… | |
72 | G3138-65117: Rotor seal for valve, Agilent ICP-MS integrated sample introductio… | |
73 | G3138-65118: Nut for valve, Agilent ICP-MS integrated sample introduction syste… | |
74 | G3138-65119: Ferrule for valve, Agilent ICP-MS integrated sample introduction s… | |
75 | G3138-65122: Sample loop, 100 uL, Agilent ICP-MS integrated sample introduction… | |
76 | G3138-65138: Tubing for gas line, 3 mm id, 4 mm d, 5 m, Agilent ICP-MS integrat… | |
77 | G3138-65139: Reducing union connector, 6 mm x 3 mm, Agilent ICP-MS integrated s… | |
78 | G3138-65140: Reducing union connector, 6 mm x 4 mm, Agilent ICP-MS integrated s… | |
79 | G3138-65144: Reducing union connector, 8 mm x 4 mm, for Agilent ICP-MS integrat… | |
80 | G3138-65158: Tubing adapter, internal standard/peripump, Agilent ICP-MS integra… | |
81 | G3139-68000: MicroFlow neb. PFA(200) w/SPS4 probe kit 1/pk. PFA MicroFlow nebul… | |
82 | G3158-80080: Pipe, preheating, stainless steel, 1/16 in, with connector for GC/… | |
83 | G3158-80150: Injector assembly for GC/ICP-MS interface used with Agilent 7700/7… | |
84 | G3160-65306: Needle, perfluoroalkoxy (PFA), 0.3 mm id, standard probe, for Agil… | |
85 | G3160-65307: Rinse bottle, external, 100 mL, with caps, for Agilent integrated … | |
86 | G3160-65325: Tubing holder, PEEK, for Agilent integrated autosampler (I-AS), us… | |
87 | G3160-65328: Tubing, Tygon, from peristaltic pump to rinse bottle or drain bott… | |
88 | G3160-80060: Sample tray, A, Agilent integrated autosampler (I-AS), 89 position… | |
89 | G3160-80061: Sample tray, B, Agilent integrated autosampler (I-AS), 53 position… | |
90 | G3160-80062: Sample tray, C, Agilent integrated autosampler (I-AS), 18 position… | |
91 | G3160-80063: Sample tray, D, Agilent integrated autosampler (I-AS), 79 position… | |
92 | G3160-80064: Sample tray, E, Agilent integrated autosampler (I-AS), 79 position… | |
93 | G3160-80065: Sample tray, F, Agilent integrated autosampler (I-AS), 15 position… | |
94 | G3160-80066: Sample Tray G, polypropylene, for Agilent integrated autosampler (… | |
95 | G3160-80200: Serial-USB converter cable for Agilent integrated autosampler (I-A… | |
96 | G3270-80024: Tubing, quartz, connector tube with dilution port for high matrix … | |
97 | G3280-60160: Tubing kit for x-lens, argon, Agilent 7700x/e and 8800 series ICP-… | |
98 | G3280-60163: Tubing kit for s-lens, argon, Agilent 7700s and 8800 semiconductor… | |
99 | G3280-60580: Organic solvent introduction kit for ICP-MS, replaces standard sam… | |
100 | G3280-67003: Consumables kit, basic, Agilent ICP-MS fitted with x-lens, for Agi… | |
101 | G3280-67004: Consumables kit, comprehensive, Agilent ICP-MS fitted with x-lens,… | |
102 | G3280-67007: Consumables kit, comprehensive, for Agilent ICP-MS fitted with s-l… | |
103 | G3280-67023: Tubing, plasma/auxiliary gas, with inner sleeve, Agilent 7700/8000… | |
104 | G3280-67035: Lens assembly, extraction-Omega lens, for s-lens, Agilent 7700s an… | |
105 | G3280-67037: Screw and spacer kit for x-lens, Agilent 7700x/e and 8000 ICP-MS f… | |
106 | G3280-67038: Screw and spacer kit for s-lens, Agilent 7700s and 8000 semiconduc… | |
107 | G3280-67039: Lens assembly, extraction-offset, for x-lens, Agilent 7700x/e and … | |
108 | G3280-67085: Consumables kit, comprehensive, for Agilent 7700e ICP-MS fitted wi… | |
109 | G3280-67221: Consumables kit, basic, with Anderol 68 pump oil, for Agilent 7800… | |
110 | G3280-80503: Spray chamber, special long arm, for Agilent 7700/8000 series ICP-… | |
111 | G3660-90003: 8800 ICP-MS Hardware Maintenance Manual for Agilent 8800 Series tr… | |
112 | G3666-60301: Skimmer base assembly, stainless steel. Suits Agilent 8900 Series … | |
113 | G3666-60311: Skimmer base, brass, for Agilent 8900 Series ICP-MS with x-lens. I… | |
114 | G3666-60401: Skimmer base assembly for s-lens, brass. Suits Agilent 8900 Series… | |
115 | G3666-60601: Skimmer base assembly for retro-s lens, brass. Suits Agilent 8900 … | |
116 | G3666-67038: Screw and spacer kit for Agilent 8900 Series ICP-MS with s/m/c-len… | |
117 | G3666-67141: Reaction cell (ORS cell) assembly, with axial accelerator, for 890… | |
118 | G3666-67142: Reaction cell (ORS cell) assembly without axial accelerator, for A… | |
119 | G3666-67300: Extraction-Omega lens assembly for x-lens, suits Agilent 8900 Seri… | |
120 | G3666-67600: Extraction-Omega lens assembly for c-lens. Suits Agilent 8900 Seri… | |
121 | G4911-20021: Peripump tubes adapter, for 2.29 mm id, suits Agilent ICP-MS integ… | |
122 | G4911-60011: Tray for Agilent ICP-MS integrated sample introduction system (ISI… | |
123 | G4911-67001: Consumables kit, comprehensive, for the Agilent ICP-MS integrated … | |
124 | G4911-68201: Preconfigured kit, auto-dilution, for Agilent ICP-MS integrated sa… | |
125 | G4911-68202: Preconfigured kit, discrete sampling, for Agilent ICP-MS integrate… | |
126 | G7201-90302: MassHunter WS (8800) User Guide-English (G7201B Rev.B.01.03) for A… | |
127 | G8400-00240: Omega bias lens for 7900 ICP-MS w/x-lens. Suits Agilent 7900 Serie… | |
128 | G8400-40113: Sample tray, plastic, for sample introduction area of Agilent 7900… | |
129 | G8400-60624: Skimmer base, stainless steel, use with Ni sampling and skimmer co… | |
130 | G8400-60625: Skimmer base, brass, use with Pt skimmer cone, includes screws, op… | |
131 | G8400-60626: Skimmer base, brass, use with Pt skimmer cone, includes screws, st… | |
132 | G8400-60627: Skimmer base, stainless, 7900 w/s-lens. Optional base used with 79… | |
133 | G8400-60710: Tubing kit, for argon humidifier, for Agilent 7900 Series ICP-MS. … | |
134 | G8400-67003: Screw and spacer kit, for Agilent 7900 Series ICP-MS with x-lens. … | |
135 | G8400-67701: Replacement Octopole Reaction System (ORS) cell assembly, suitable… | |
136 | G8411-67002: Gas tubing kit for valve of ISIS 3 Suits the ISIS 3 used with the … | |
137 | G8411-67111: ISIS valve rotor seal replacement kit 1/pk. Includes rotor seal fo… | |
138 | G8411-67113: ISIS valve assembly kit. Includes 7 port injection valve, mounting… | |
139 | G8411-67114: ISIS 3-way valve assembly kit, 1/pk. Includes 3-way rocker isolati… | |
140 | G8411-67115: Piston pump seal replacement kit, for Agilent Integrated Sample In… | |
141 | G8411-67116: Piston pump seal installation tool, ISIS 1/pk. Required to replace… | |
142 | G8411-67117: Sample tubing, perfluoroalkoxy (PFA), 1.0 mm id, 1/16 inch od, 5 m… | |
143 | G8411-67118: Sample tubing, perfluoroalkoxy (PFA), 2.18 mm id, 1/8 inch od, 5 m… | |
144 | G8411-68201: ISIS3 preconfigured kit discrete samples Suits the ISIS 3 used wit… | |
145 | G8411-80115: ISIS piston pump, 1/pk. Suits the Agilent Integrated Sample Introd… | |
146 | G8411-80119: Nut, PEEK, for pump used with Agilent Integrated Sample Introducti… | |
147 | Gas connector, for ICP-MS dilution gas line connection to dilution port | |
148 | Gas filter, argon | |
149 | GC Interface manual for Agilent 7700 Series ICP-MS | |
150 | Guard Column for As Speciation | |
151 | Hardware maintenance manual in Japanese for Agilent 7700 Series ICP-MS | |
152 | Holder for carry tray cover, Agilent integrated autosampler (I-AS) | |
153 | Interface wrench for Sampling cone for 7700 ICP-MS | |
154 | Interface wrench, for skimmer cone removal in Agilent 7700/8800 ICP-MS | |
155 | Joint holder, nebulizer pump, Agilent 7700/8000 series ICP-MS | |
156 | Lens, cell entrance, Agilent 7700x/s/e and 8800 series ICP-MS | |
157 | Lens, cell exit, Agilent 7700x/s/e and 8800 series ICP-MS | |
158 | Lens, cell focus, Agilent 7700x/s/e and 8800 series ICP-MS | |
159 | Lens, deflect, Agilent 7700x/s/e and 8800 series ICP-MS | |
160 | Lens, extraction 1, for x-lens, Agilent 7700x/e and 8800 series ICP-MS | |
161 | Lens, extraction 2, for x-lens, Agilent 7700x/e and 8800 series ICP-MS | |
162 | Lens, Omega bias, for s-lens, Agilent 7700s and 8800 semiconductor ICP-MS | |
163 | Lens, Omega bias, for x-lens, Agilent 7700x/e and 8800 series ICP-MS | |
164 | Lens, Omega, for s-lens, Agilent 7700s and 8800 semiconductor ICP-MS | |
165 | Lens, Omega, for x-lens, Agilent 7700x/s/e and 8800 series ICP-MS | |
166 | Maintenance video/DVD for ICP-MS, covers Agilent 7700 series ICP-MS | |
167 | Manual vent valve, Agilent 7700/8000 series ICP-MS | |
168 | Manual, English, Agilent integrated autosampler (I-AS), Agilent ICP-MS | |
169 | Manual, Japanese, Agilent integrated autosampler (I-AS), Agilent ICP-MS | |
170 | MassHunter user guide, Japanese, Agilent ICP-MS | |
171 | MassHunter WorkStation User Guide-English for Agilent 7700 Series ICP-MS | |
172 | MassHunter WorkStation User Guide-Japanese for Agilent 7700 Series ICP-MS | |
173 | Mixer for Agilent ICP-MS integrated sample introduction system (ISIS) | |
174 | Needle holder, Agilent integrated autosampler (I-AS) | |
175 | O-ring for vacuum chamber, Viton, Agilent ICP-MS | |
176 | O-ring for vent valve, Viton, 2/pk | |
177 | O-ring kit for concentric nebulizer, for ICP-MS | |
178 | Octopole assembly with axial accelerator, for Agilent 8900 Series ICP-MS | |
179 | Octopole assembly without axial accelerator, for Agilent 8900 Series ICP-MS | |
180 | Octopole assembly, Agilent 7700/8000 series ICP-MS | |
181 | Octopole reaction system (ORS) cell assembly for 77/7900 series ICP-MS and 8800 ICP triple quadrupole | |
182 | Octopole reaction system (ORS) cell assembly for 7800 series ICP-MS | |
183 | Octopole reaction system (ORS) cell assembly, for Agilent 7800 ICP-MS | |
184 | Odor Element for oil mist filter for E2M18, 5/pk | |
185 | Offset skimmer assembly, Agilent 7700s and 8800 semiconductor ICP-MS | |
186 | Offset skimmer base assembly, 7900, 1/pk Suits Agilent 7900 Series ICP-MS | |
187 | Offset skimmer tool, Agilent ICP-MS | |
188 | Oil mist filter element, for DS402 rotary vane pump, replacement only | |
189 | Oil mist filter kit for Edward E1M18/E2M28 vacuum pumps | |
190 | Omega bias lens for 8900 QQQ ICP-MS with s-lens | |
191 | Omega lens for 8900 QQQ ICP-MS with s-lens | |
192 | Omega lens for x-lens, 7900 ICP-MS, 1/pk Suits Agilent 7900 Series ICP-MS. | |
193 | Online internal standard addition kit for ICP-MS | |
194 | Periodic table sheet, for Agilent 7900, 8800 ICP MS, 100/pk | |
195 | PFA tube, 1/8 inch, 2 m for 7700 GC-ICP-MS | |
196 | Pipe, stainless steel, Sulfinert, 1/16 in, 1.05 m, GC/ICP-MS interface | |
197 | Plate bias, Agilent 7700x/s/e and 8800 series ICP-MS | |
198 | Plug for carrier gas connector (4.0 mm od), 3/pk | |
199 | Plug for cross joint, 3/pk | |
200 | Plug for dilution port, 4 mm, for 7700 ICP-MS | |