Vnosi od 1 do 47. Najdeno od vseh 47 vnosov.
| Z.š. | Opis | |
|---|
| 1 | Abdrehsicherungen für ''RODAVISS'' | |
| 2 | DURAN® Cones with ridge | |
| 3 | DURAN® KPG Stirrer bearings, interchangeable | |
| 4 | DURAN® KPG Stirrer shafts, interchangeable, hollow, with 2 pivots | |
| 5 | DURAN® KPG Stirrer shafts, interchangeable, solid, WB 10 | |
| 6 | DURAN® Long ground cones, finished | |
| 7 | DURAN® Screwthread tube for glass blowers | |
| 8 | DURAN® Screwthread tube with cone (NS), GL 14 | |
| 9 | DURAN® Screwthread tube with cone (NS), GL 18 | |
| 10 | DURAN® Screwthread tube with cone (NS), GL 25 | |
| 11 | DURAN® Screwthread tube with cone (NS), GL 32 | |
| 12 | DURAN® Screwthread tubes | |
| 13 | DURAN® Screwthread tubes, RD 14 | |
| 14 | DURAN® Screwthread tubes, SVL | |
| 15 | DURAN® Short ground cones, finished | |
| 16 | DURAN® Spherical joints, ball, inches size | |
| 17 | DURAN® Spherical joints, ball, polished | |
| 18 | DURAN® Spherical joints, cup, inches size | |
| 19 | DURAN® Spherical joints, cup, polished | |
| 20 | DURAN® Standard cones, diamond ground | |
| 21 | DURAN® Standard cones, double, finished | |
| 22 | DURAN® Standard cones, finished | |
| 23 | DURAN® Standard cones, skirted, finished | |
| 24 | DURAN® stopcock keys with groove, ground | |
| 25 | DURAN® Stopcock keys with thread, hollow | |
| 26 | DURAN® tube with two hose connections, tube length: 115 mm | |
| 27 | KECK clips for conical joints, POM | |
| 28 | KECK Locking ring for adapter KA | |
| 29 | KECK Screw cap for adapter KA, with sealing EPDM12 mm | |
| 30 | KECK Tubing part for adapters KA | |
| 31 | Keck-Clips for conical joints, NI, KCM | |
| 32 | KECK-clips for conical joints, POM, KC | |
| 33 | KECK-clips for spherical joints, POM, S 35, orange | |
| 34 | Keys for stopcocks with 3 grooves PTFE, double oblique | |
| 35 | O-Rings for stopcock keys with groove | |
| 36 | PTFE sealing tapes | |
| 37 | PTFE-keys with thread, taper 1:5 and 3 part retaining device | |
| 38 | PTFE-keys with thread, with 3 part retaining device | |
| 39 | Screwcaps closed, with seal for Rodaviss® | |
| 40 | Screwcaps for Rodaviss® , open | |
| 41 | Sealing rings (Silicone + FEP), for polished spherical joints | |
| 42 | Sealing rings (Viton) | |
| 43 | Sealing rings made of Nitrile for Rodaviss® | |
| 44 | Silicone sealing ring, GL 25, without washer | |
| 45 | Silicone sealing ring, GL 32, without PTFE washer | |
| 46 | Stopcock keys threaded, SBW glas, ground | |
| 47 | Three part retaining device, complete for hollow stopcocks | |